May 17, 2018

The Initialized Storage Systems Properties window opens. This option automatically detects all switches connected to the switch identified by the IP address. Invalid firmware image file Status code If the XCS firmware image file is the wrong image, an Operation failed message is displayed. Page 63 Task Task complete Step 7. You should enter the e-mail address where you typically receive e-mail. Don’t have an account?

Uploader: Milkis
Date Added: 14 July 2009
File Size: 19.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 44803
Price: Free* [*Free Regsitration Required]

Page 40 – Upgrading disk drive firmware in an HP C To reduce the risk of personal injury or damage to equipment: On the General tab under Temporary Internet files, click Settings. Rack stability Rack stability protects personnel and equipment. Any time prior to the hp hsv200 scsi array Monitoring storage system stability, page 38 Time required: Read them before continuing.

HP 6100 Software Manual

This option automatically detects all switches connected to the switch identified by the IP address. Before upgrading your Enterprise Virtual Array, hp hsv200 scsi array should check the operation of the storage system hardware and replace any failed components. In the Navigation pane, select the array for which you want to update hp hsv200 scsi array disk drive firmware. Nothing herein should be construed as constituting an additional warranty.

You will need them if you need to download the software again. This guide does not provide information about upgrading or changing the Enterprise Virtual Array hardware. Proactive event notification can be used to alert you if a critical event occurs during the 48 hours before the upgrade. Page 56 In the Navigation pane, select the array for which you want to update hard disk drive firmware.


Clear Capture Performance data for this switch. The View Events hp hsv200 scsi array opens. Save and clean the application eventlog file. Don’t show me this message again. The new storage system software is copied to the controllers and validated. Verify that there are no hardware components in the Unmappable Hardware folder. Check the Hardware folder in the Navigation pane.

See Figure This page is displayed until the controller code load is complete and the controllers restart. The web server sends it to the browser. Table 7 lists some possible causes of these errors and their corrective actions.

An alert that calls attention to helpful hints and shortcuts. Enter a name in SAN Name. Figure 23 Status icon for a good storage system If the status icon for the storage system is not a green hp hsv200 scsi array, it indicates a problem that must be corrected before proceeding.

Close all applications running on the management sci.

Figure 14 shows an example. Select SAN Settings and enter the following information: Page 78 Support and other resources Ensure that no DR group is logging, merging, hp hsv200 scsi array copying. Enter your name in Name. Selecting zcsi option will increase the amount of time required to collect the switch data.

Page 44 Pre-upgrade tasks Ensure that you follow them carefully and hp hsv200 scsi array the specified order. Check Collect data for all switch groups to create reports for all the fabrics. Once access is enabled, select Compatibility Tool in the left menu and then select Fibre Channel Switch.